Marker Data for the SE-DBj-2pc dual band j-Pole antenna from 420 Mc. to 450 Mc.
(Measured with 10 feet of RG-8X cable.)
Typical VSWR curve for the SE-DBj-2pc dual band j-Pole from 420 Mc. to 450 Mc. (RED Line)
(Measured with 10 feet of RG-8X cable)
Marker Data for the SE-DBj-2pc dual band j-Pole antenna from 143.5 Mc. to 148.5 Mc.
(Measured with 10 feet RG-8X cable)
Typical VSWR curve for SE-DBj-2pc dual band j-Pole antenna between 143.5 Mc. and 148.5 Mc. (RED Line)
(Measured with 10 feet RG-8X cable)
SE-DBj closeup of the mast mount and connector interface.
SE-DBj dual band j-Pole antenna covering 144 to 148 Mc. and 420 to 450 Mc. ham bands.
SAL Electronics, LLC
The Antenna Store & More
Hours: Monday - Friday
9:00 AM to 5:00 PM (CST)
SE-DBj-2pc: Two piece 146/440 Mc. Dual Band j-Pole for travel/back packing
The ubiquitous dual band j-Pole antenna, the SE-DBj-2pc covers 144 to 146 Mc. at 1.6:1 or less VSWR and 420 to
450 Mc. at 2.2:1 or less VSWR. Heavy Duty construction that allows 80 MPH wind survival with 1/2" radial ice. The
SE-DBj-2pc j-Pole antenna uses a two piece main element that can be disassembled in half to provide compact storage for travel
or back packing operation. The dual band j-Pole antenna is provides omni-directional coverage for 2 meters and
UHF ham bands using a single transmission line. This antenna provides a convenent interface with any dual band 146/440 Mc. transceiver
using a single antenna port. The SE-DBj-2pc is constructed of 6063-T832 hard drawn aluminum tubing, and stainless steel
components for years of trouble free operation. The use of aluminum tubing provides for a very light weight (1.5 lbs.) unit.
The SE-DBj-2pc is designed to be mounted vertically for FM operation. Built for fixed station and portable
operation. Mast clamp is designed to accept sizes between 1" to 1-3/4" OD. Equipped with a SO-239 (UHF
Female). Designed primarily as a transmit/receive antenna for the 2 meter and UHF ham bands, the SE-DBj makes a great scanner
receiver antenna for 28 Mc. to 900 Mc. reception.
SE-DBj-2pc dual band j-Pole antenna made with aluminum and stainless steel hardware
Closeup showing mast mount and connector interface.
Specifications
Electrical:
Frequency:
Gain:
1.5:1 Bandwidth:
Maximum VSWR:
Power Limit:
Impedance:
Polarization:
Mechanical:
Boom Length:
Assembled
Weight:
Mounting Clamp:
SQ. Surface Area:
Cable Connector:
Wind Survival:
Maximum Height:
Hardware:
Mounting Clamps:
Screws
and nuts:
Boom:
Elements:
144 Mc. to 148 Mc. & 420 Mc. to 450 Mc.
2.15 dBi (0 dBd)
4 Mc. for 2M, and 20 Mc. for UHF
1.5:1 (144
Mc. to 146 Mc.); 1.6:1 (425 Mc. to 450 Mc.)
1,000 Watts
50 ohms
Vertical
5.5 inches
1.5 lbs
1" to 1.75"
capacity
0.27 sq ft Horizontal
SO-239 (UHF Female
80 MPH with 1/2" radial ice
60"
Zinc Plated
18-8 stainless steel
5.5",
6061-T6 x 1/8" wall
3/8" 6063-T832 double drawn aluminum tubing
SE-DBj-2pc dual band j-pole Antenna, UHF Connector
Plus S&H and any applicable state sales tax
© 2010 - 2022 - SAL Electronics, LLC, Algonquin, IL 60102
Typical VSWR of SE-DBj-2pc dual band j-Pole between 143.5 Mc. to 148.5 Mc. (RED Line). (Measured with 10 ft of RG-8X)
SE-DBj-2pc dual band j-Pole Marker Data for the above VHF VSWR curve between 143.5 Mc. to 148.5 Mc.
Typical VSWR of SE-DBj-2pc dual band j-Pole between 420 Mc. to 450 Mc. (RED Line) (Measured with 10 ft of RG-8X)
SE-DBj-2pc dual band j-Pole Marker Data for the above UHF VSWR curve between 420 Mc. to 450 Mc.
NO International orders accepted for this item.
SE-DBj-2pc main element Quick-Connect/Disconnect feature for fast setup and knock-down. Just insert and secure with the Stainless
Steel hose clamp for a fast and secure connection.
Connected