SE10M 10 Meter Moxon. Can also be setup for 11 Meter band.
SE1720M Moxon antenna for 17 or 20 Meter operation.
Hours: Monday - Friday
9:00 AM to 5:00 PM (CST)
© 2010 - 2016 - SAL Electronics, LLC, Algonquin, IL 60102
6 Meter Moxon Beam that covers 50 to 52 MHz at 1.5:1 or less. Covers 50 to 54 MHz at 2:1 or less, providing coverage of the
FM band as well. The SE-6M can be mounted horizontally or vertically. Constructed of 1/2" hard drawn 6063-T832 aluminum
tubing, 6061-T6 aluminum, UV resistant PVC, and stainless steel hardware. Comes with a 1:1 Maxwell ferrite choke balun with
a UHF Female connector. Stack two with a phasing harness to gain +3dB of additional gain.
Click picture for
ordering and additional information.
2 Meter Moxon Beam antenna that covers 144 to 148 MHz at 1.5:1 or less VSWR. Covers 141.5 MHz to 151.5 MHz at less than 2:1
VSWR, providing coverage of CAP frequencies too. Constructed of 3/8" hard drawn 6063-T832 aluminum tubing, 6061-T6 aluminum,
UV resistant PVC, and stainless steel hardware. Comes with a 1:1 Ruthroff voltage balun with a choice of a UHF
Female or Type-N Female connector. Stack two with a phasing harness to gain +3dB of additional gain.
SE-6M-U Moxon
Horizontally mounted
SE2MB Moxon Horizontally mounted
SAL Electronics, LLC
The Antenna Store & More
17 meter Moxon Beam that covers 18.068 to 18.168 MHz at 1.3:1 or less VSWR. Adjustable setting that provide 1.3:1 VSWR
over a 0.2 MHz bandwidth. The SE-1720M can be also be setup for 20 Meter operation by resetting the reflector and
element spacer settings. Constructed of 3/4", 5/8" and 1/2" hard drawn 6063-T832 aluminum tubing, 6061-T6 aluminum
tubing, UV resistant PVC, and stainless steel hardware. Comes with a 1:1 Maxwell ferrite choke balun with UHF female connector.
Optional element suspension kit available for the SE1720M when setup for 20 meter operation.
Click picture for ordering
and additional information.
10 meter Moxon Beam that covers 28 to 29.7 MHz at 2:1 or less VSWR. Adjustable setting that provide 1.5:1 VSWR over a 1.3 MHz
bandwidth. The SE-10M can be field tunable anywhere between 26 and 35 MHz. The SE-10M can be mounted horizontal for
SSB/CW operation, or vertical for FM operation. Constructed of 5/8" and 1/2" hard drawn 6063-T832 aluminum tubing, 6061-T6
aluminum tubing, UV resistant PVC, and stainless steel hardware. Comes with a 1:1 Maxwell ferrite choke balun with UHF female
connector. NOTE: Can also be adjusted to operate on the 11 Meter band. Stack two for up to +3 dB forward gain.
Click picture
for ordering and additional information.