SAL Electronics Moxon Beam made of USA components.
SE-6M antenna horizontal azimuth pattern
SE-6M Moxon shown Vertically mounted.
SE-6M Moxon shown Horizonally mounted.
Typical VSWR Curve for SE-6M62 Meter Moxon. Has usable range with less than 2:1 VSWR from 50 MHz to 54 MHz. Optimized for 50 to 52 MHz SSB operation, however it is still usable from 52 to 54 MHz for FM operation.
Close-up showing element mounts and balun box.
SE-6M 6 Meter Moxon Beam Antenna
6 meter Moxon Beam that covers 50 to 52 MHz at 1.5:1 or less. Cover 50
MHz to 54 MHz at 2:1 or less providing coverage of FM frequencies as well. Heavy Duty construction that allows
120 MPH wind survival with 1/2" radial ice. The SE-6M features a 1:1 Maxwell ferrite choke balun that provides blockage
of RF down the transmission line . Constructed of aluminum, fiberglass, UV resistant PVC, and stainless steel components
for years of trouble free operation. The SE-6M can be mounted horizontally for best CW/SSB operation, or it can be
mounted vertically for FM operation, standard. Can be used for VHF rover operation, and strong enough to be used for
permanent fixed operation. May be stacked with a phasing harness for higher gain (+3dB) fixed station applications. Equipped
standard with SO-239 (UHF) female at the end of the choke balun.
MHz to 52 MHz (1.5:1 VSWR or less)
Forward Gain: 5.98 dBi (3.8
Front-to-Back: -33 dB (Horizontal)
-22 dB (Vertical)
Maximum VSWR: 2:1 (50 MHz to 54 MHz)
Power Limit: 1.5K
Impedance: 50 ohms
Horizontal or Vertical
Boom Length: 33 in.
Weight: 6.2 lbs
Mounting Clamp: 1" to 1-1/4" capacity
SQ. Surface Area: 2.0
sq ft Horizontal
sq ft Vertical
Cable Connector: SO-239 (UHF Female)
120 MPH with 1/2" radial ice
Element Width: 84"
Turning Radius: 47.0 inch Horizontal
19.5 inch Vertical
Mounting Clamp: Zinc Plated
Screws and Nuts: 18-8 Stainless Steel
1.5", 6061-T6 aircraft quality aluminum
1/2", 6063-T832 Double Drawn aluminum
Maxwell Ferrite Choke Balun
SAL Electronics LLC
Algonquin, IL 60102
Phone: (815) 669-6567
Copyright 2010 - 2013 SAL Electronics, LLC, Algonquin, IL 60102
Monday - Friday
9:00 AM to 5:00 PM (CST)
SE-2M Moxon Horizontally Mounted
SE-2M Moxon Vertically Mounted
(Includes FREE shipping to US including AK & HI)
NO International orders accepted for this item.
4NEC2 calculated radiation pattern for the SE-6M.
BLUE = Vertical Azimuth Pattern
UV resistant PVC element mounting plates.
Typical 6 Meter VSWR curve for the SE-6M antenna. VSWR bandwidth is less than 1.5:1 from 50 to 52 MHz.
1:1 Maxwell Ferrite Balun provides RF choking
1.25" mast clamp with 2" square U-Bolts for horizontal or vertical mounting.
Heavy Duty 1.5" 6061-T6 aluminum square boom.