SAL Electronics SE-EF8010

Typical VSWR for the SE-EF8010 at 10 ft AGL.

Standard connector is a silver plated with Teflon dielectric UHF Female SO-239. An optional Type-N female connector is also available.

Antenna terminal wing nut allows for quick field install or removal of antenna element for field operation/repair.

Hand Wound Mid Power single core 4:1 Voltage Unun.

Complete SE-EF8010, 43 ft antenna assembly. Uses NEMA 6 weather resistant housing and stainless steel hardware.

SE-EF8010, 43 ft End fed Multiband Antenna.

SAL Electronics Wire Antennas are made in the USA.

SE-EF8010 80 to 10 meter End-Fed Antenna

43 ft Multiband End Fed Antenna. A compact End Fed antenna usable from 80 Meters to 10 Meters. May be used without a tuner on 40, 20 and 10 Meters. Other bands will require an antenna tuner for full band coverage. Limited coverage of the upper portion of 6 Meters for FM operation without an antenna tuner: (See VSWR plot below).

SE

SAL Electronics LLC

Algonquin, IL 60102

Phone: (815) 669-6567

| ARRL | SpaceWeather | SpeedTest | PingTest |

Copyright 2010 - 2013 SAL Electronics, LLC, Algonquin, IL 60102

Monday - Friday
9:00 AM to 5:00 PM (CST)

Hours

The SE-EF8010 Antenna can be strung horizontal or at an angle to save space

Strung at an angle
to save space.

Approx.

14 ft per side.

Approximately

10.75 ft per side.

Approximately

14 ft per side.

Approx.

21.5 ft per side.

SAL Electronics

SE-EF8010 End Fed Zep Antenna

Physical Length

Space Saving Delta Loop

Space Saving Square Loop

Space Saving Horizontal U

Space Saving Horizontal V

Frequency Range

Tuner Required *

Mid Power Unun

Single Core Voltage Unun

Weatherproof

Direct DC Ground

Isolation Transformer Required

RF in Shack

Stainless Steel Hardware

Minimum Height

NO Strain Mount

43 feet

YES

YES

YES

YES

80 to 10 Meters

Full Bandwidth *

0.5 KW PEP

YES

YES

YES

NO

NO

YES,18-8

YES

20 feet

(*) External tuner required for full band coverage

site stats

Specifications:

Frequency: 80 meters to 10 meters (Requires antenna tuner for full band coverage)

Power Limit: 0.5 KW PEP, 100 Watts continuous (AM, FM, RTTY)

Grounding: Direct DC ground

Antenna Length: 43 feet (13 meters) [Easy Field Replacable Design]

Matching: Dual Core 4:1 Voltage Unun

Weight: 1.5 lbs

Connector: SO-239, Silver w/Teflon

Housing: 4" x 4" x 2" PVC NEMA 6 Weatherproof Housing

with Stainless Steel Hardware

Configurations: End Fed Loop, End Fed "V", End Fed "U"

Polarization: Horizontal or Vertical

(FREE shipping to US including AK & HI)

$99.95

Hand Wound Mid Power Single Core 4:1 Voltage Unun

SAL Electronics Wire Antennas are made in the USA

SE-EF8010 43 ft, 80 to 10 Meter End Fed Antenna

Complete SE-EF8010 assembly.

Water resistant NEMA 6 housing.

All stainless steel hardware.

SE-EF8010, 43 ft, 80 to 10 meter End Fed Multiband Antenna.

SE-EF8010 Hand Wound Mid Power 4:1 Voltage Unun.

Wing nut used to attach wire antenna element to the transformer-matching unit.

Antenna terminal wing nut attachment

SO-239 Silver/Teflon UHF Connector. Type-N Optional.

Silver/Teflon

SO-239 Connector

135 ft OCF Dipole

Mast Mount Bracket

2 Meter Ground Plane

Dual Band Ground Plane

Typical VSWR for SE-EF8010 at 10 ft above ground, fed with 10 ft RG-8X Cable

80

40

30

20

17

15

12

10

6

(FREE shipping to US including AK & HI)

$109.95

SE-EF8010FW: EF8010 End Fed antenna made with 43 feet of #14 gauge Flex-Weave wire with Black Jacket.