Raw SE-EF1606 VSWR curve at 20 ft AGL before antenna tuner.
Standard antenna connector is a silver plated/Teflon dielectric SO-239 UHF-Female. Type-N Female connector is optional.
Antenna terminal wing nut allows for easy wire attachment or removal for field work. Eyebolt eliminates any stress from antenna terminal connection.
Hand Wound Mid Power Single Core 4:1 Voltage Unun.
SE-EF1606, 90 ft 160 to 6 Meter Multiband Antenna.
SE-EF1606, 90 ft Mid-Power End fed Multiband Antenna.
SAL Electronics Wire Antennas are made in the USA
sal_electronics_v1005043.gif
SE-EF1606 160 to 6 meter End-Fed Antenna
 
 
90 ft Multiband End Fed Antenna.  This is a non-resonant length antenna that covers the 160 meters to 6 meter amateur radio bands with the use of a wideband antenna tuner.  Also provides continuous coverage of shortwave bands from 0.4 MHz to 54 MHz. 
 
sal_electronics_v1005042.gif
sal_electronics_v1005041.gif
SE
sal_electronics_v1001006.gif
Home
sal_electronics_v1001005.gif
Tech Info
sal_electronics_v1001004.gif
Contact
sal_electronics_v1001004.gif
sal_electronics_v1001004.gif
sal_electronics_v1001004.gif
sal_electronics_v1001004.gif
Articles
FAQ's
About Us
Policies
SAL Electronics LLC
Algonquin, IL 60102
Phone: (815) 669-6567
 
| ARRL | SpaceWeather | SpeedTest | PingTest |
Copyright 2010 - 2014 SAL Electronics, LLC, Algonquin, IL 60102
Monday - Friday
9:00 AM to 5:00 PM (CST)
Hours
sal_electronics_v1005040.jpg
sal_electronics_v1005039.jpg
The SE-EF1606 Antenna can be strung horizontal or at an angle to save space
Strung at an angle
to save space.
Approx.
30 ft per side.
Approximately
22.5 ft per side.
Approximately
30 ft per side.
Approx.
45 ft per side.
SAL Electronics
SE-EF1606 End Fed Zep Antenna
sal_electronics_v1005038.gif
sal_electronics_v1005037.gif
sal_electronics_v1005036.gif
sal_electronics_v1005035.gif
sal_electronics_v1005034.gif
sal_electronics_v1005033.gif
sal_electronics_v1005032.gif
sal_electronics_v1005031.gif
sal_electronics_v1005030.gif
sal_electronics_v1005029.gif
sal_electronics_v1005028.gif
sal_electronics_v1005027.gif
sal_electronics_v1005026.gif
sal_electronics_v1005025.gif
sal_electronics_v1005024.gif
sal_electronics_v1005023.gif
sal_electronics_v1005022.gif
sal_electronics_v1005021.gif
sal_electronics_v1005020.gif
sal_electronics_v1005019.gif
sal_electronics_v1005018.gif
sal_electronics_v1005017.gif
sal_electronics_v1005016.gif
sal_electronics_v1005015.gif
sal_electronics_v1005014.gif
sal_electronics_v1005013.gif
sal_electronics_v1005012.gif
sal_electronics_v1005011.gif
sal_electronics_v1005010.gif
sal_electronics_v1005009.gif
sal_electronics_v1005008.gif
sal_electronics_v1005007.gif
Physical Length
Space Saving Delta Loop
Space Saving Square Loop
Space Saving Horizontal U
Space Saving Horizontal V
Frequency Range
Tuner Required *
Mid Power Unun
Single Core Voltage Unun
Weatherproof
Direct DC Ground
Isolation Transformer Required
RF in Shack
Stainless Steel Hardware
Minimum Height
NO Strain Mount
90 feet
YES
YES
YES
YES
160 to 6 Meters
Full Bandwidth *
0.5 KW PEP
YES
YES
YES
NO
NO
YES,18-8
YES
20 feet
(*) External tuner required for full band coverage
Specifications:
Frequency:            160 meters to 6 meters (Ham Tx requires wideband antenna tuner)
                              0.5 MHz (500 KHz) to 54 MHz (Short-wave RX)
Power Limit:         0.5 KW PEP, 100 Watts continuous (AM, FM, RTTY)
Grounding:            Direct DC ground
Antenna Length:   90 feet (27 meters) [Easy Field Replacable Design]
Matching:              Single Core 4:1 Voltage Unun
Weight:                 1.5 lbs
Connector:            SO-239, Silver w/Teflon
Housing:                4" x 4" x 2" PVC NEMA 6 Weatherproof Housing
                              with Stainless Steel Hardware
Configurations:     End Fed Loop, End Fed "V", End Fed "U"
Polarization:         Horizontal or Vertical
(FREE shipping to US including AK & HI)
$119.95
Hand Wound Mid Power Single Core 4:1 Voltage Unun
SAL Electronics Wire Antennas are made in the USA
SE-EF1606 90 ft, 160 to 6 Meter End Fed Antenna
SE-EF1606, 90 ft 160 to 6 Meter Multiband Antenna.
SE-EF1606 Hand Wound Mid Power 4:1 Voltage Unun.
Complete SE-EF1606 assembly.
Water resistant Nema 6 Housing.
All stainless steel hardware.
 
Wing nut used to attach wire antenna element to the transformer-matching unit.
sal_electronics_v1005003.jpg
Antenna terminal wing nut attachment
SO-239 Silver/Teflon UHF Connector.  Type-N Optional.
Silver/Teflon
SO-239 Connector
sal_electronics_v1005002.jpg
paypal_logo_small_v3.jpg
sal_electronics_v1001004.gif
135 ft OCF Dipole
90 ft End Fed
43 ft End Fed
45 ft End Fed
Mast Mount Bracket
2 Meter Moxon
6 Meter Moxon
2 Meter Ground Plane
Dual Band Ground Plane
Accessories
Products
aim_se-ef1606_vswr_curve.jpg
80
40
30
20
17
15
12
10
6
sal_electronics_v1001002.jpg