Hours: Monday - Friday
9:00 AM to 5:00 PM (CST)
SAL Electronics provides you with the finest HF heavy-duty wire antennas. SAL Electronics supplies single-wire wideband design
antennas that give you easier installation than multi-wire systems, and one that provides a more stealthier (harder to
see) installation in neighborhoods that do not like to see antennas. The Off-Center-Fed (OCF) design applies the feed point
where you have room to install an antenna in a more conventional dipole-like manner. The End-Fed design is used where a
compact installation is needed, providing a convenient fed point near or at a building location. The End-Fed will
require a wideband antenna tuner, whereas the OCF can be used without an antenna tuner for most bands. The smaller
EF-4010 End-fed antenna is ideal for portable or attic installations between 40 and 10 meters, plus it makes for a great all band SDR
receiving antenna from 0.5 to 108 MHz. All SAL Electronics' HF wire antennas are designed with a low noise direct
DC ground transformer.
© 2010 - 2019 - SAL Electronics, LLC, Algonquin, IL 60102
The SE-OCF806, 135 ft., overall (40.7 Meters) Off-Center-Fed style antenna provides 7-band operation on 80 (with a tuner); 40, 20,
17, 12, lower 10, and lower 6 Meter bands without a tuner. Limited operation can be provided on 60, 30, and 15 Meters with a
wideband tuner with a maximum power level of 100 Watts PEP. The transformer is houses in a NEMA-6 marine grade weatherproof
housing with stainless steel hardware. Connector is a silver plated UHF (SO-239) connector with Teflon insulation. Antenna
wire is 100% stranded #14 copper with black none-contaminating jacket for stealth installation.
The SEEF8010, 43 ft., (13 Meter) non-resonant End-Fed antenna. Use where a dipole arrangement is impractical. The
SE-EF8010 can be installed as a conventional straight-top or sloper, or as a horizontal "V", "U", Triangular or Square loop
arrangement for a more omni-directional pattern. The SEEF8010 is a non-resonant antenna that requires a wideband tuner
for operation anywhere from 80 to 10 Meters at a maximum power level of 500 Watts PEP. The transformer is houses in a NEMA-6
marine grade weatherproof housing with stainless steel hardware. Connector is a silver plated UHF (SO-239) connector with Teflon
insulation. Antenna wire is 100% stranded #14 copper with black none-contaminating jacket for stealth installation.
Click picture for ordering and detailed information.
The SEEF4010, 45 ft., (14 Meter) non-resonant End-Fed antenna. The size makes it practical for portable or attic installations.
Use where a dipole arrangement is impractical. The SE-EF4010 can be installed as a conventional straight-top or sloper,
or as a horizontal "V", "U", Triangular or Square loop arrangement for a more omni-directional pattern. The SEEF4010
is a non-resonant antenna that requires a wideband tuner for operation anywhere from 40 to 10 Meters at a maximum power level
of 100 Watts PEP. The transformer is houses in a PVC housing with stainless steel hardware. Connector is a silver
plated UHF (SO-239) connector with Teflon insulation. Antenna wire is 100% stranded #14 copper with black none-contaminating jacket
for stealth installation. The SE-4010 can also be used as a SDR receiving antenna from 0.5 to 108 MHz.
SE-OCF806
SE-OCF4010
SE-EF8010
SE-EF8010FW
SE-EF4010
SAL Electronics, LLC
The Antenna Store & More
The SE-OCF4010, 66 ft., overall (20.1 Meters) Off-Center-Fed style antenna provides 7-band operation on 40, 20, lower 10, bands
without a tuner. Limited operation can be provided on 17, 15, and 12 Meters with a wideband tuner with a maximum power
level of 100 Watts PEP. The transformer is houses in a NEMA-6 marine grade weatherproof housing with stainless steel hardware.
Connector is a silver plated UHF (SO-239) connector with Teflon insulation. Antenna wire is 100% stranded #12 copper with gray none-contaminating jacket
for stealth installation.